Haltech

Haltech Elite CAN Cable DTM-4 to 8 pin Black Tyco Length: 150mm (6")

Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 3000mm (120")

Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 2400mm (92")

Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 1800mm (72")

Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 900mm (36")

Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 600mm (24")

Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 150mm (6")

Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 75mm (3")

Haltech Elite CAN Cable DTM-4 to OBDII Notes: Vehicle side OBDII Connector Length: 1800mm (72")

Elite CAN HUB 4 Port DTM-4 Suits: For use with up to three CAN devices. Includes: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 - 300mm (...

O2 Sensor weld-on bung - 6061 Aluminium Suits: M18 Thread Oxygen Sensors Includes: 1 x 6061 Aluminium Weld On Bung

O2 Sensor weld-on bung - 303 Stainless Steel Includes: 1 x Weld on Bung - 303 Stainless Steel 1 x Copper washer and 1 x Blanking plug.

Wideband Extension Harness To suit LSU4.9 Length: 1.2M (4ft)

LSU4.9 Wideband Adaptor Harness LSU4.9 to DTM6 Suits: NEXUS Series devices Includes: 1 x HT-010726 LSU4.9 to DTM-6 Harness Notes: PlugnPlay with NE...

NTK Wideband Adaptor Harness For NEXUS Series Devices Suits: NEXUS Series Devices Includes: 1 x HT-010727 NTK to DTM-6 Harness Length: 1.2M (4ft)

Wideband O2 Sensor NTK LZA08-H5 - 4mA Suits: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units. Includes: 1 x NTK LZA08-H5 Wideband Sensor No...

WB2 NTK - Dual Channel CAN O2 Wideband Controller Kit Suits: NTK Sensor Includes: Dual Channel, CAN Wideband Controller, 2 x NTK Sensors, CAN Cable...

WB1 NTK - Single Channel CAN O2 Wideband Controller Kit Suits: NTK Sensor Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable ...

Wideband O2 Sensor only - Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector.

WB2 Bosch - Dual Channel CAN O2 Wideband Controller Kit Suits: Bosch LSU 4.9 Sensor Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sen...

WB1 Bosch - Single Channel CAN O2 Wideband Controller Kit Suits: Bosch LSU 4.9 Sensor Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sen...

PD16 Flying Lead Harness - 5M Suits: Nexus PD16 Includes: Wire in Harness, 5 meters (16ft) in Length - Suits Nexus PD16 Length: 5M / 16FT

PD16 PDM + Flying Lead Harness (5M) Suits: Compatible with Haltech Elite and Nexus ECUs ONLY Does not function as a stand-alone PDM. Includes: Halt...

PD16 PDM + Plug and pin Set Suits: Compatible with Haltech Elite and Nexus ECUs ONLY Does not function as a stand-alone PDM. Includes: Haltech PD16...

PD16 PDM Suits: Compatible with Haltech Elite and Nexus ECUs ONLY Does not function as a stand-alone PDM. Includes: 1 x Haltech PD16,1 x SurLok 120...

CAN Adaptor Loom - DT-4 to DTM-4 Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor Harness Notes: CAN Cable - DT-4 to DTM-4 Adapt...

CAN Keypad Label Set Suits: Haltech CAN Keypads Includes: 5 Label Sheet (140 individual labels) Notes: A selection of pre designed, semi transparen...

Haltech CAN Keypad 15 button (3x5) Suits: NEXUS and Elite devices only Includes: 1 x 15 Button Keypad (3x5), 1 x Adaptor Harness DT-4 to DTM-4, 1 x...

Haltech CAN Keypad 8 button (2x4) Suits: NEXUS and Elite devices only Includes: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x D...

Extension Cable for Haltech Multi-Function CAN Gauge Length: 150cm (5)

Daisy-chain Cable for Haltech Multi-Function CAN Gauge

Multi-Function CAN Gauge Suits: Haltech Version 2 CAN bus protocol. Includes: 52mm (2") CAN Gauge, gaugeART DTM-style CAN cable - 2.5m (8ft), mount...

iC-7 Sensor Pack For Stand-Alone Installations Suits: iC-7 Semi Terminated Harness - HT-060300 Includes: 1 x HT-010304 Coolant Temp Sensor - 1/8 NP...

Elite PRO Direct Plug-in and IC-7 / uC-10 Auxilary Connector kit Suits: Elite Pro Plug-in ECUs IC-7 Display Dash uC-10 Display Dash Includes: Termi...

iC-7 Mounting Bracket with Integrated Visor Suits: Haltech iC-7 Display Dash Includes: 1 x 2.5mm Black Annodized Aluminium Bracket with integrated ...

iC-7 Moulded Panel Mount Suits: Haltech iC-7 Display Dash Includes: 1 x iC-7 Moulded Panel Mount- Black Notes: Suits Haltech IC-7 Display Dash Pane...

Semi Terminated Stand-Alone Harness For iC-7 Display Dash Suits: Haltech iC-7 Display Dash HT-010001 - iC-7Sensor Pack Includes: 1 x Semi Terminate...

Haltech iC-7 Stand-Alone "Classic" Kit Suits: Perfect for old-school hot rods, mechanically injected muscle, carbureted classics and everything in ...

Haltech iC-7 OBD-II Colour Display Dash Suits: Preconfigured to connect directly (via CAN) to most late model vehicles (approx 2008-on) using the f...

Haltech IC-7 Digital Dash Kit Suits: All current Haltech ECUs via CAN. Also PlugnPlay compatible with the following aftermarket ECU brands: Link, M...

CAN Adaptor Loom DTM-4 to Minifit Jr Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes: Use with Microtech CAN ...

CAN Adaptor Loom DTM-4 to 6-pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force G...

CAN Adaptor Loom DTM-4 to Flying Leads Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector Includ...

CAN Adaptor Loom DTM-4 to JST 5-pin Suits: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs Includes: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin...

Haltech iC-7 / uC-10 OBDII to CAN Cable Suits: Haltech iC-7 / uC-10 Dash Includes: Cable and Fuse Length: 1400mm / 55in