haltech

Bosch - DBW Pedal Assembly Suits: Nexus and Elite VCUs and ECUs that support Drive by Wire Throttle Control (DBW) Includes: DBW Pedal Assembly and ...

Bosch - DBW Pedal Assembly Connector Kit Suits: Bosch DBW Pedal Assembly - HT-011900 Includes: 1 x Connector 6 x Pins 6 x Seals

Bosch - Electronic Throttle Body Connector Kit Suits: Bosch Electronic Throttle Bodies HT-011800 / HT-011801 / HT-011802 / HT-011803 Includes: 1 x ...

Bosch 145 PSI Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor. Notes: Used to measure...

Bosch 4000psi Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug, pins and seals Notes: Used to measure fluid pressure and tem...

Bosch 60mm Electronic Throttle Body - Includes connector and pins Suits: Nexus and Elite VCUs and ECUs that support Drive by Wire Throttle Control ...

Bosch 68mm Electronic Throttle Body - Includes connector and pins Suits: Nexus and Elite VCUs and ECUs that support Drive by Wire Throttle Control ...

Bosch 74mm Electronic Throttle Body - Includes connector and pins Suits: Nexus and Elite VCUs and ECUs that support Drive by Wire Throttle Control ...

Bosch 82mm Electronic Throttle Body - Includes connector and pins Suits: Nexus and Elite VCUs and ECUs that support Drive by Wire Throttle Control ...

Cable - Multicore - 3 x 22AWG (Orange/Black/White) - 10M (32) Length: 10M / 32ft

Cable - Multicore - 4 x 20AWG (Red/Black/White/Blue) - 10M (32) Length: 10M / 32ft

CAN Adaptor Loom - DT-4 to DTM-4 Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor Harness Notes: CAN Cable - DT-4 to DTM-4 Adapt...

CAN Adaptor Loom DTM-4 to 6-pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force G...

CAN Adaptor Loom DTM-4 to Flying Leads Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector Includ...

CAN Adaptor Loom DTM-4 to JST 5-pin Suits: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs Includes: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin...

CAN Adaptor Loom DTM-4 to Minifit Jr Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes: Use with Microtech CAN ...

CAN Keypad Label Set Suits: Haltech CAN Keypads Includes: 5 Label Sheet (140 individual labels) Notes: A selection of pre designed, semi transparen...

CO2 Boost Control Dual Solenoid & Pressure Sensor Kit Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wastegate pressure se...

Coolant Temp Sensor Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading.

Coolant Temp Sensor - Large Thread Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Coolant Temp Sensor - Small Thread Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Crimping Tool Suits DT Series Solid Contacts Suits: Suits DT Series Solid Contacts and Cable sizes 0.5mm2 to 1.5mm2 Includes: 1 x DT Crimping Tool ...

Crimping Tool Suits DTM Series Solid Contacts Suits: DTM Series Solid Contacts and Cable sizes 0.515mm2 to 0.81mm2 Includes: 1 x DTM Crimper Notes:...

Crimping Tool Suits DTP Series Solid Contacts Suits: DTP Series Solid Contacts and Cable sizes 2.05mm2 to 3.3mm2 Includes: 1 x DTP Crimping Tool No...

Daisy-chain Cable for Haltech Multi-Function CAN Gauge

DC Motor Driver - DCMD Outputs: 2 Suits: Turbosmart Electronic Wastegates Varex Motors DC Motors Includes: 1 x DC Motor Driver - DCMD 1 x DT02-2S w...

Dual Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

Dual Crimper Set Inc 3 pin removal tools Includes: 2 x Open Barrel Crimper tools 3 x Removal tools

Dual Switch Panel Kit Includes: Dual panel, yellow adjustment knob and 2 x 12 position rotary trim modules.

Dual Switch Panel Only Includes: Dual panel and yellow adjustment knob. Notes: 12 Position Rotary Trim Modules are NOT included, Please order 2 x H...

ECU Pins - AMP Superseal Suits: 26 Pin, 2 Row and 26/34 Pin, 4 Row AMP Range (E6X) Includes: Pack of 10 Pins.

ECU Pins only - Tyco Suits: 8-32 Pin Tyco Connector Range Includes: Pack of 10 Pins.

Elite 1000-2500 Mazda RX7 FD3S-S6 Plug n Play Adaptor Harness Suits: Plug n Play replacement of the factory ECU for Mazda RX7 FD3S-S6 (92-95) 2 row...